Home Contact Us
Books Photos          
  Tiny Trailer Design   Weekender Camper Design  

New design

Weekender II Design  Myway Upholstery   
 

This is our Weekender Trailer.  

O.K. I must admit that the tiny trailer was just too tiny so a rebuild was in order. The design is original and was built around a 4’x 8’ utility trailer with no flooring purchased from Tractor Supply Company. We wanted something that would fit on the trailer and not hang off the end, sleep the three of us, and built on a budget. We hope this design will inspire others. Pictures can be saved for full size viewing

 

Finally Finished??

 

 

 

The exterior is skinned with 3/8 rough plywood, sanded, primer sealed, then painted with two coats exterior white enamel paint. (The hinged door on the front opens to allow the AC to mount in the opening)

Concept drawings

weekender measured.jpg (153365 bytes) weekender3d framing.jpg (244095 bytes) weekender measured2.jpg (100260 bytes)

right.jpg (73220 bytes) left.jpg (72709 bytes) front.jpg (57705 bytes) end_framing.jpg (67179 bytes) floor plan.jpg (47865 bytes)

Construction and framing concept (click on thumbnail for lager view)

DESCRIPTIVE TEXT - Notes on construction

NEXT PAGE    Teardrops and Tiny travel Trailers Forum, with good advice and free downloadable plans: www.mikenchell.com/forums

   

 

 

     
   

Copyright © 2008 S.Stewart. All rights reserved. txstewartfamily.com. The information, photos, and graphics on this website may not be reproduced, republished, copied, or mirrored onto another website or forum, or offered on CD, DVD, or printed material without written permission of the owner of txstewartfamily.com. No commercial use allowed. Permission to print information and photos from this website for educational, noncommercial purposes is granted to any individual who wants to build his own camper/ tiny trailer trailer.